JM Series Enclosure

Brand: Valmet
StoneL Enclosure, JM Series
StoneL Enclosure, JM Series
Images are representations only.

JM Series Enclosure

Brand: Valmet
Request Information Favorite
StoneL’s Junction Module (JM) enclosure is an environmentally hardened platform which is suitable for use in the most extreme corrosive and hazardous process environments.

The JM features a wide variety of bus networking capabilities for protocols used in the process industries. Because of its flexibility and functionality it has become an essential building block for bus network users in the processing industries.
Features
  • Keep bus energized during maintenance in Division 1 Areas FM approved factory-sealed leads are available for the drop leg of the switched drop connector. In Division 1 areas the conduit must not be opened to atmosphere when wires are energized. However, with factory-sealed leads no energized wires are exposed to the atmosphere when the drop leg is opened or removed for maintenance even though the bus trunk remains energized.
  • Rugged enclosure This enclosure is constructed of durable, marine grade anodized aluminum with two coats of epoxy. Optional clear polycarbonate cover enables observation of circuit status without opening the enclosure.
  • Vapor tight and submersible Rated for IP67 and NEMA 4, 4X and 6, the JM withstands rigorous washdowns and corrosive environments.
  • Wide variety of functions Select from drop connectors, switched drop connectors, relay modules, I/O modules, power conditioners, and special module configurations.

Specifications

Brand

Approvals & Certifications

  • CSA
  • FM Explosion-proof Class I, Div. 1, Groups B, C, D & Class II, Div. 1, Groups E, F, G
  • FM Intrinsically Safe (FISCO) Class I, II, III, Div. 1, Grade A, B, C, D, E, F, G
  • FM Non-Incendive Apparatus Class I, Div. 2, Grade A, B, C, D & Class II, Div. 2, Groups F, G

Conduit Connection

  • 1/2” NPT
  • 3/4” NPT
  • M20

Configuration

  • I/O Modules with Integral Solenoid Valve Configuration: Double Pilot, 5-Way 2-Position Shuttle Piston
  • I/O Modules with Integral Solenoid Valve Configuration: Single Pilot, 5-Way 2-Position Spring Return

Consumption

  • < 40 mA
  • I/O Module & Relay Module DeviceNet Current Consumption: < 60 mA (with No Outputs Energized)
  • I/O Module & Relay Module Fieldbus Current Consumption: < 17 mA
  • I/O Module & Relay Module Modbus Current Consumption: < 20 mA (No Outputs Energized & No Analog Input)

Cover Material

  • Clear Cover: Lexan Polycarbonate

Current

  • 40 mA
  • 8 A
  • I/O Modules with Integral Solenoid Valve (Piezo Pilot) Current Requirement: 2 mA at 6.5 Vdc
  • I/O Modules with Integral Solenoid Valve (Solenoid Pilot) Current Requirement: 75 mA at 24 Vdc
  • JMX00, JMX01 & JMX06 Operating Current: 120 mA
  • JMX00, JMX01 & JMX06 Operating Current: 60 mA (Per Segment)
  • JMX01, JMX02, JMX05 & JMX06, Max.
  • JMX04 Current Consumption: < 17 mA
  • Switched Drop Connectors Holding Current (After Trip): 28 mA
  • Switched Drop Connectors Trip Current (Drop): 200 mA (DN & MB/PB-DP)
  • Switched Drop Connectors Trip Current (Drop): 240 mA (AS-i)

Elastomers

  • Buna-N

Enclosure, Body Material

  • Housing & Cover: Marine Grade Anodized Aluminum with Epoxy Coating

Environmental Protection

  • IP66
  • IP67
  • NEMA 4
  • NEMA 4X
  • NEMA 6

Filter

  • I/O Modules with Integral Solenoid Valve (Piezo Pilot) Filtration Requirement: 5 microns, Dried
  • I/O Modules with Integral Solenoid Valve (Solenoid Pilot) Filtration Requirement: 40 microns

Flow Rate

  • 0.7 CV

Input

  • 3 mA at 28 Vdc
  • 4-20 mA
  • I/O Module DeviceNet & Modbus Discrete Input: 7 mA at 24 Vdc
  • JMX01, JMX02, JMX05 & JMX06 Input Voltage: 26-32 Vdc
  • JMX04 Discrete Input: (2) 6.5 Vdc < 0.45 mA

Materials of Construction

  • Brass
  • Stainless Steel

Operating Pressure

  • psi: 25 to 120 (kPa: 172.4 to 827.4, bar: 1.7 to 8.2)

Operating Temperature

  • I/O Modules with Integral Solenoid Valve (Piezo Pilot) Operating Temperature: -10° to 60° C (14° to 140° F)
  • I/O Modules with Integral Solenoid Valve (Solenoid Pilot) Operating Temperature: -18° to 50° C (-4° to 122° F)

Operating Voltages

  • 24 Vdc
  • 9-32 Vdc

Output

  • 120/250 Vac
  • 24 Vdc
  • 28 Vdc
  • 4-20 mA
  • I/O Module Fieldbus & JMX04 Discrete Output: JMM93 (2) 6.5 Vdc 2 mA
  • Relay Module AS-i, DeviceNet, Fieldbus & Modbus External Voltage (Relay Outputs): 30 Vdc
  • Relay Module AS-i, DeviceNet, Fieldbus & Modbus External Voltage (Relay Outputs): up to 250 Vac

Port

  • 1/4” NPT

Temperature Range

  • -40° to 80° C (-40° to 176° F)

Voltage

  • 35 Vdc

Voltage Drop

  • < 1 V

Documentation

Data Sheets

show more