AST5400 Differential Pressure Transducer

Brand: American Sensor Technologies Inc
AST Differential Pressure Transducer, AST5400
AST Differential Pressure Transducer, AST5400
Images are representations only.

AST5400 Differential Pressure Transducer

Brand: American Sensor Technologies Inc
Request Information Favorite
AST5400 wet/wet differential pressure transducers can measure the differential pressure of liquids or gases with line pressures up to 5,000 psi (350 bar) and a turn-down ratio of 15 to 1. 

Using Krystal Bond Technology, the AST5400 differential pressure transducer contains no silicone oil, O-rings, or welds. The low strain level on the diaphragm results in accurate, repeatable measurements. The AST5400 wet/wet differential pressure transducer is commonly used to measure differential pressure across filters or calculate flow across an orifice plates. 

With its digital compensation, the AST5400 DP offers excellent linearity and performance over temperature. The electronics offer a failsafe condition on the output signal. The AST5400 DP can be manufactured using 316L, 17-4 PH, Inconel® 718, or Hastelloy® C276 and is available for hazardous locations.
Features
  • Explosion Proof and Non-Incendive Available
  • ABS (American Bureau of Shipping) Approved 
  • Krystal Bond™ Technology
  • ASIC Compensation 
  • Turn-Down Capability 
  • Both or Either Pressure Port Can See Full Line Pressure - No Expensive Balancing Valves Required 
  • Line Pressure up to 5,000 psi (350 bar) 
  • Smart Electronics with Failure Condition Protection 
  • Wide Variety of Materials for Various Liquids and Gases

Specifications

Brand

Accuracy

  • < ± 1 % of Line Pressure Including Non-Linearity, Repeatability & Hysteresis

Applications

  • Building Automation
  • Compressors
  • Desalination Equipment (Inconel718 Recommended)
  • Fuel Systems
  • HVac/R Systems
  • Hydraulic Applications
  • Hydrogen (316L Only)
  • Labs/Metrology
  • Military Vehicles
  • Oil & Gas Applications

Approvals & Certifications

  • ATEX
  • Ex d IIC T5 Gb, NA IIC T5 Gc
  • IECEx

Compensated Temperature

  • -20° to 70° C (-4° to 158° F)

Consumption

  • < 15 mA

Electrical Connectors

  • 10 feet (24 AWG) Cable
  • 18 AWG, 24” (61 cm)
  • 18 AWG, 48” (121.92 cm)
  • 18 AWG, 78” (2 metres)
  • 2 feet (24 AWG) Cable
  • 4 feet (24 AWG) Cable
  • 4-Pin TURCK Connector
  • 6 feet (24 AWG) Cable
  • 6-Pin Bendix PT06
  • Conduit, 4 feet
  • Conduit, 6 feet
  • DIN 43650-A Connection
  • M12 x 1 Plug 4-Pin
  • Mini DIN 43650

Environmental Protection

  • IP66
  • IP67

Excitation Voltage

  • 10-28 Vdc

Humidity

  • 0 to 100 % Relative Humidity, Non-Condensing

NPT Connection

  • 1/4” NPT Male
  • 1/8” NPT Male

Operating Temperature

  • -20° to 70° C (-4° to 158° F)

Output

  • 0-10 V
  • 4-20 mA

Output Load

  • < 1 mV RMS

Output Noise

  • 0 to 800 ohms at 10-28 Vdc
  • 5000 ohms Minium

Pressure Range

  • bar: 0 to 344.7
  • kPa: 0 to 34,473
  • psi: 0 to 5,000

Pressure Type

  • Differential

Reverse Polarity Protection

  • Yes

RFI/EMI Protection

  • Yes

Shock

  • 100 G, 10 milliseconds, 1/2 Sine

Storage Temperature

  • -55° to 120° C (-67° to 248° F)

UNF/UNC Connection

  • 7/16”-20 UNF Female
  • 7/16”-20 UNF Male

Vibration

  • 10 G Peak in the Range between 20 to 2,000 Hz

Wetted Materials

  • 316L Stainless Steel
  • 630 Stainless Steel
  • Hastelloy C-276
  • Inconel 718

Zero Offset

  • < ± 1 % of Full Scale

  • Oil / Gas Equipment
  • Building Automation
  • Fuel Systems
  • Hydraulics
  • Hydrogen (316L only)
  • Labs / Metrology
  • Compression Systems
  • Military Vehicles
  • HVAC/R Systems
  • Desalination Equipment (Inconel718 Recommended)

Documentation

show more